Today
we will install Citycell ZOOM Ultra wireless usb EVDO modem in Ubuntu 12.04 using
wvdial. However, this method is applicable to any usb modem. If you want to
install and use your modem graphically, read this.
First
of all, download wvdial. Wvdial is a PPP(Point-to-Point) dialer helps us to use
modems. Wvdial depends on some little packages which are essential for wvdial
to work successfully. Download 3 packages from the following locations.
Wvdial
dependancies:
Ok, now , first we will install these
dependancies first. These are debian packages. Copy these packages to a
temporary folder, I’m copying them to tmp folder of my file system. Now open
terminal, insert the following commands:
cd
/tmp
sudo
dpkg –i libuniconf4.6.deb
sudo
dpkg –i libwvstreams4.6-base.deb
sudo
dpkg –i libwvstreams4.6-extras.deb
Enter
your password when prompted.
So
we’ve installed the dependancies, now we’ll install wvdial. Assuming that our
downloaded wvdial package is in tmp folder, install wvdial from terminal as
follows:
cd
/tmp
sudo
dpkg –i wvdial_1.61-4build1_i386.deb
Here
wvdial_1.61-4build1_i386.deb is the name of my downloaded wvdial package.
Relace it with your downloaded package name. Ok, wvdial is now installed and we
are almost done.
Make
sure your modem is detected by Ubuntu, plug your modem in usb and enter the
following command in terminal:
lsusb
–v
If
the manufacturer’s name is shown in terminal, your modem is detected. Fine.
Now
from terminal, enter the following command one after one:
cd
/etc
sudo
gedit wvdial.conf
This
will open a text file. Enter exactly the following lines there:
[Dialer
citycell]
Phone
= #777
Username
= waps
Password
= waps
Yes,
you're done. Now save and close the text file. The Dialer name, Phone, Username and Password are specific to provider citycell, please replace these values with the one of your provider (Contact your provider if you don't have these info). To use your modem (EVERY TIME), plug the modem, then open terminal
and enter the following command:
sudo
wvdial citycell
DON'T
CLOSE THE TERMINAL WHILE USING MODEM. To disconnect, press CTRL+c.
Thank
you. If you've any query, feel free to comment. Goodnight.
Thanks for the post! But why wvdial; why you aren't using network connections wizard?
ReplyDelete